SINGLE-ROW BEARINGS
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:
Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions,Have low torque capacity at startup and running speeds,Can operate with low noise,Require little maintenance.As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

- NSK HM926740/HM926710 SINGLE-ROW BEARINGS
- 68.30 mm
- 2.00 mm

- NSK 68450/68712 SINGLE-ROW BEARINGS
- 559 mm
- NNU.3/C3W33WI

- NSK LL483449/LL483418 SINGLE-ROW BEARINGS
- 40 mm
- 23.5 mm

- NSK EE291201/291750 SINGLE-ROW BEARINGS
- 75 mm
- 149 mm

- NSK EE130787/131400 SINGLE-ROW BEARINGS
- 150.0000 mm
- 85.000 mm

- NSK 74525/74856 SINGLE-ROW BEARINGS
- 2400 rpm
- One Shield

- NSK HH923649/HH923610 SINGLE-ROW BEARINGS
- 0.6563 in
- 5220 lbf

- NSK HR32044XJ SINGLE-ROW BEARINGS
- 2.1 mm
- mm

- NSK EE221026/221575 SINGLE-ROW BEARINGS
- 42.062 mm
- 3.175 mm

- NSK HM743337/HM743310 SINGLE-ROW BEARINGS
- 15 mm
- 7 100 min-1